E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-18 of 18 Results
  1. Driveline
    Damaged the bottom end on my 2005 ZHP at the track. Cylinder head is still good w/ performance package cams and freshly rebuilt vanos. 197k miles. Anyone want to buy the whole thing before I take out the cams and scrap the rest? Can help load.
    $400 USD
  2. Engine Swaps
    I was wondering people's opinions on a 325i with a 330i swap, Schrick track cams(272, 264) and a CXRacing turbo kit, with an LSD and OEM+ interior upgrades? Anything else major I should do?
  3. E46 M3
    Customer step into with a beautiful M3 phenix yellow, 2001 S54B32. The problem is that the customer had started to dismantle the vanos, cams and so on, and then he bring it in the workshop because he was worried to not correclty remount all. Simple question: the cams are mixed up, without...
  4. E46 General
    Doing a head gasket job, and I'm about to grab the camshaft alignment tool to lock them in place at top dead center. Problem is I placed the locking blocks on the camshafts but the center pin doesn't fit in place. The blocks are too distant to screw them down. This is while the flywheel pin is...
  5. m54 head

    looks to be sound, no signs of failure anywhere
  6. E46 General
    I havent really found a straight answer to this question. So will euro s50 cams and solid lifters fit in an M54? I assume the cams and trays would at least need some modification, even then, I have doubts because the s50 shares more in common with the s54 than the M5x engines. :hmm:
  7. E46 General
    My e46 is about due to get an oil change so yesterday I went out and invested in 8quarts of Royal purple synthetic. After I drained all the oil out of the car, I opened the filler cap and I noticed all the nasty sludge on it and the cam cover. I had seen it before but I figured that before I put...
  8. DIY: Do It Yourself
    Hi everyone. Here is my DIY: How To Remove And Install Cams Without Any Special Tools Like I promised i was going to make a DIY, here it is. Please save your jokes about my accent, English is not my first language, but I did my best. <USE AT OWN RISK> First thing that I want to mention BEFORE...
  9. Forced Induction
    Is anyone running ESS SC cams for the e46? Any information would help me out. Im running an AA stage 1 soon to be Stage 2. Thanks.
1-18 of 18 Results