getBMWparts.com | Accept No Substitute: Shop Genuine OEM BMW Fluids!!! Genuine BMW Fluids are developed, tested, and approved for the high-performance components of your Ultimate Driving Machine. Shop and Save on our full line of Genuine BMW Fluids - including BMW Engine Oil...

getBMWparts.com | Accept No Substitute: Shop Genuine OEM BMW Fluids!!! Genuine BMW Fluids are developed, tested, and approved for the high-performance components of your Ultimate Driving Machine. Shop and Save on our full line of Genuine BMW Fluids - including BMW Engine Oil...

getBMWparts.com | Accept No Substitute: Shop Genuine OEM BMW Fluids!!! Genuine BMW Fluids are developed, tested, and approved for the high-performance components of your Ultimate Driving Machine. Shop and Save on our full line of Genuine BMW Fluids - including BMW Engine Oil...

My new rotors, pads and sensors arrive today. Tomorrow I'm doing the front brake job. What brake fluid do you recommend?

Hey guys Time for me to do my brakes again. Have left over dot 4 blue brake fluid 1.5 cans. I realize that the fluid can absorb moisture from the air in the can. It's been a few years. Should I just dump it and buy new? Wondering if it's worth using to save some bucks. Thanks a bunch

I just had my rotors and pads replaced on my ZHP, as well as have the brake fluid replaced, and now I have to press my brake pedal almost all the way down for them to start working.:tsk: The guy who put the rotors on also put the drilled/slotted rotors on backwards (left of the right side and...

I have a 2000 323i with 106K miles on it. I've kept it pretty well maintained, serviced at an indy mechanic & have saved a lot of $$$ doing a lot of work myself. Last year I had a crack in my coolant expansion tank. I replaced it, & decided while I was into it, I'd replace the water pump...

Hello everyone I searched the forums for that, could not really find anything. If I missed a topic, I apologize. Now, I recently noticed that the rubber pad on my clutch would not stay on and sort of slipped off every now and then...Today I was soo pissed at the situation that I actually...

So i need help again... since i let my brake fluid reservoir run dry and disconnected the two brake fluids from my master cylinder, i decided it was necessary for me to bench bleed the master cylinder... so heres the problem... the master cylinder is in the car... so i let the brake reservoir...

hey everyone so i was proceeding to remove my brake booster after what happened in my previous thread (rubber grommet from brake booster vacuum line falling into the brake booster).... so i started to empty the brake fluid with a syringe and i noticed that there is a drain cap that is blocking...