E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-9 of 9 Results
  1. Driveline, Performance, Tuning
    Greetings, I have an M54b30 and I've been having an issue with the car behaving sluggish once reaching operating temperature, there's a night and day difference with torque output between driving it within the first 10 minutes of start up (when still running cold) and then once at operating...
  2. Other
    Hi all. I want to share my experience with BMW coding. I have used scan tool Launch X431. Unlock all doors when car stops and turn off the engine” In order to code that option you need to access CAS module of your BMW and change it to ”enable” You can also change your preference if you whant the...
  3. Other
    Hi all !!!The system Auto Start / Stop in my cars (BMW series 1 and Series 3 ) is simply disable :cool:. In my opinion this system , takes you more ,than gives you some advantages , so I used scan tool Launch X431 and I disabled this car's option .What do you think and What is your opinion ...
  4. Other
    Valvetronic system alouds your engine to reduce your “pumping” losses in low and mid range loads! From here you have more efficient fuel consumption and better emissions! This video’s purpose is to show you how my engine behaves with 0,3 mm minimum valve lift and 0,8 mm minimum valve lift! For...
  5. E90
    One of the fnction many people trying to disable is Auto Start / Stop . I want to share with you my expiriance . I manage to disable it on F20 BMW 1 Series, but the same option apply to BMW E90 3 Series! See below the wat , how to do it . 👇
  6. E46 General
    Anyone in the triad NC area willing and able to code an automatic to manual swapped 323 wagon? The car runs and I’ve had it on the road for a couple weeks now. I’d like the cog light off and a factory feel. The software I’m using is more hassle than I’d like to deal with, and I don’t feel like...
  7. E46 General
    Hi everyone. I tried to code my blinkers on my e46 116i FL because that one blink really annoys me. I tried it with NCSExpert but I failed miserably. Now I noticed that when I turn of the car with the Headlight switch on the most right position, the dash light stays on and the light switches to...
  8. E46 XI
    Around November of last year I had a hole puncture through the #3 piston in my '02 325xi after overheating :( Though I've since acquired, rebuilt, and swapped in the 3.0L from a 330i I found on CL. Took a massive learning curve to realize what was different from i to xi, but I managed to get...
  9. E46 General
    Is it possible to code both halogens and xenons to run on a e46 with pa soft? I have a 325ci with adaptive xenons
1-9 of 9 Results
Top