E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 6 Results
  1. E46 General
    Another resource for you all: https://wiki.bentleypublishers.com/pages/viewpage.action?pageId=12910646 Hope this helps.
  2. E46 XI
    I am ready to press new OEM bearings into front knuckles of my '05 325xi. Bentley manual says to use Loctite 648 (Green) and to cover half or better of the outside of the bearing shell. In disassembly I could tell that the factory did this - there was residual cured excess Loctite in the back...
  3. E46 General
    Having been a member of this forum for many years, I have always been able to find DIY or technical support for the standard repairs and maintenance I have needed to do on my E46 sedan and coupe. I am now planning to embark on something a bit more difficult (replacement of rear engine seal) and...
  4. DIY: Do It Yourself
    Alright fanatics, I need some help. I recently developed a 1/4" or so gap on the passenger side of my front bumper (2002 coupe here), and I'm having a hell of a time fixing it. Gap I have been reading about how to adjust the bumpers to eliminate sagging, and the first thing I tried was the...
  5. E46 Showroom
    Widebody Bentley GT by Platinum Motorsports! Photography by me you can check out more of my work at www.flickr.com/photos/sdotb <center> <a href="http://s446.photobucket.com/albums/qq190/Sdotbphotography/?action=view&current=IMG_0300tag.jpg" target="_blank"><img...
1-5 of 6 Results