Decided to change out fsr while waiting to see if aux fuse was killing my battery. Upon changing i noticed how the lanch holding it seemed to be stuck. Was a b!tch but tried my hardest not to break it and upon pulling old unit out, immediate realization that this one is shockingly different...
yah i did a refresh cooling system last week
this is basically my thoughts and some side notes after the cooling refresh
i went with the behr (oem) radiator
it will not fit in that easy the first time
there will be a 1 / 4 " gap on the screw bolt points (which you will need to...
- Floor jack and one jack stand
- Philips screwdriver
- Torx 25 bit
- 8" extension
- 3/8ths ratchet
- 8mm socket or 8mm wrench
- 9mm socket
- 13mm socket
- Fan clutch tools
- OEM electric fan: 17117561757
- Expanding rivet: 17111712963 (for the expansion tank side to hold fan to...