E46 Fanatics Forum banner

Discussions Showcase Albums Media Media Comments Tags Marketplace

1-5 of 5 Results
  1. Suspension, Brakes
    This is going to be a quick review of Condor Speed Shop's UHMW offset front control arm bushing. Thought I'd do a write up since I haven't found one yet. Unfortunately I don't have many pictures of what I did so you'll just have to bear with me. The bushing consists of a UHMW polyethylene...
  2. E46 General
    Hey guys, I have auto leveling xenon headlights and ever since I replaced my control arms years ago, my headlights have never worked the same since. I do not have the little up/down test that I used to when I started up the car. I was never able to properly connect the sensor arm to the...
  3. DIY: Do It Yourself
    Today I got the MIS RTAB tool, made the install of my bushing quite a breeze, however after looking into needing an alignment, I am seeing all of this about preloading the bushings! I thought everything went smoothly but after dropping the car to the floor and there was a pop. I am guessing this...
  4. Suspension, Brakes
    Hi guys, been browsing the site for quite a while looking for a similar case but I'm not sure if I've found one. Basically my problem is this, my right rear wheel is sitting at a negative 2.4 camber and is obviously very off. My left rear is sitting at negative 1.5 and is ideal. The problem has...
1-5 of 5 Results
Top