E46 Fanatics Forum banner
  • Hey everyone! Enter your ride HERE to be a part of September's Ride of the Month Challenge!
325i 2001
1-20 of 31 Results
  1. E46 General
    I have these codes and if anyone can help thanks, but when I go to about 5000 rpm, it cuts out and then I can release the pedal and put it down again and it’ll go, I don’t know if it’s suppsoe to do that but thanksI
  2. E46 General
    Hello everyone, im reposting again with more info to see if that helps! My bmw recently doesn't want to stay on for long, time to time it does stay on but looks like its fighting to stay on. I had looked up videos and bought some new parts but sadly all of them didn't work to fix the problem :(...
  3. E46 General
    So, I blew my brake booster check valve for my 01 325i (auto), and had to pull the intake to replace it, I already knew the process for getting it out and all, so everything goes fine. Then after everything is back together and connected, I try to start it, and it doesn't start. So I remove all...
  4. E46 Introductions
    Hello forum. I recently purchased my first BMW automobile (already had an r1150gs). The 2001 325i wagon I bought has just over 200k miles on it but seems like it's been well maintained so I'm looking forward to seeing how long I can make it last and plan on being on here alot to take advantage...
  5. E46 General
    Hi guys So i just did a clutch fan delete and also a mishimoto fan controll for the cluster fan because I just finished a head gasket job and complete cooling overhaul. Now with the fan turning on at 90 degrees temp, Full Power! my temperature still goes up to 97 with the heater on and when i...
  6. E46 General
    I was browsing craigslist and I came across these authentic M3 wheels from an E90 for only 300$. My only concern is fitment, the car has the stock 16" rims on it and I feel like I could fit a bigger rim on. Is there any chance these will fit on my car without rubbing?
  7. E46 General
    Ive tried scouring several forums but i havent found the exact answer im looking for so here goes. Since august 2019 I am the proud owner of a Pre-facelift E46 325i (2001/06). I managed to retrofit a bluetooth module myself and then turned to replacing my button-less 4 spoke plastic steering...
  8. E46 General
    Is there a kit for the manual trans version of the e46, or will the ones stating "for automatic transmission" still work? Looking for one that has the mount with it as well. When it popped, it took some of the radiator plastic and possibly parts of the mount with it. Thanks!
  9. E46 General
    So i have been looking around for a new front bumper and i am interested in an m-tech, i would like to know if ebay bumpers are any good?
  10. E46 General
    When my a/c is on cool air blows from top vents, but hot blows from floor vents at the same time(when on auto or manual). So blowers are definitely working. It's been 92°+ here, need this fixed ASAP. It's hard to cool off with heat blasting from underneath. Any suggestions or tips???
  11. E46 General
    I have a four door 2001 325i manual. It has black interior and came like that from factory. I was wondering how common this was? :pimpin:
  12. E46 General
    So I need help here my fellow E46 bros and gals. I bought the 325i 01 for 1,000$ @ 128k has rough idle and recently started turning off while driving on cold start. I blew the transmission and won't go in reverse. I know the rough idle is fixable and I think thats why the car is turning off. But...
  13. E46 General
    HI, I have a 2001 325i, and I came home and I shut the car off and I Installed some hid's. after doing so, I went to start the car and it would crank but won't start. I checked all the fuses and they're good, I changed all the fuses in the ECU in the engine bay, in the black box. Also my battery...
  14. E46 General
    I have yellow ABS BRAKE and dsc lights on. And got lean codes with the diagnostics reader. Ill drive for a bit then car goes to limp mode eventually shutting off...any ideas what the problem(s) could be?? **I have codes for P0171-Bank 1 system too lean. P0102-Mass Or Volume Air Flow A Circuit...
  15. E46 General
    Hi All, I need some help to see if anyone can help to narrow my options: I own a 2001 bmw 325I and my cats were clogged so I decided to order after market direct fit cats from a reputable autoparts store. So, I did order BMW 18407514502 & 503 CALIFORNIA Emission certified. What I got was...
  16. E46 General
    Hello everyone, I am stuck on a dilemma with my 2001 325i. The damn Secondary Airpump monitor is not setting. Here is what I have done; got all the vacuum leaks fixed, new oem MAF sensor, my mechanic inspected all of the SAP components to see what was failing and everything checked out fine...
  17. E46 General
    I've got a 2001 325i (e46 of course!). It's leaking coolant. I started the car today, watched, nothing happening. Let it run for 15 minutes or so, checking every so often, and on the last check, there was a puddle forming under the car. I hunted around with a torch, and could see drips, they...
  18. E46 General
    Ok everyone i just bought a 01 325i. if you try to start it it will start once and chug real bad if you get any gas Italy mediately die, and it will give a slight backfire through the intake. it has the code p 00 14 referencing off my 323 if I unplug all the vanos in cam sensors it still runs...
  19. E46 General
    Hello all, while driving my 2001 325i (137k miles) on the interstate last week, the Service Engine Soon light made its appearance. Although no noticeable difference in performance was observed, I brought it into the nearest auto parts store for a code check. P0741: Torque Converter Clutch not...
  20. E46 General
    ok so once my car hit 140xxx it started to through up codes and then the acceleration went way down and it has bad hesitation going through gears, if i leave it in normal auto it will not shift out of 1st unless i let off the throttle and second has lag up to about 4 nd a half thousand rpm but...
1-20 of 31 Results
Top