I'm looking for a little wider stance on a 2000 323i. No plans on suspension just yet. I'm thinking 15mm in the rear and 12mm up front.
Y'all think this is too much for non altered suspension with factory spot wheels?
I run 35mm on the rear and 25 on the front with very little rubbing on a 1.5/1" drop and 16x7 ET47 wheels
If you measure don't do it wrong like i did. Measure from the inner fender lip, not the outer...I would be perfect and no rubbing with 30mm on the rear.
Unless you opt for a higher-end kit (i.e. those offered by Black Forest Industries) with an easy-removal notch, apply a thin coat of Anti-Seize to the Rotor Hat (not the braking surface, of course).
I have a pair of 25s and 35s forged aluminum with black coating bolt-on style with lugs for sale if anyone wants them... They will make your ugly style 44s fit snug af
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Related Threads
?
?
?
?
?
E46 Fanatics Forum
17.9M posts
592.8K members
Since 2001
A forum community dedicated to BMW E46, E90, and F30 owners and enthusiasts. Come join the discussion about M performance, turbo kits, engine swaps, builds, modifications, classifieds, troubleshooting, maintenance, and more!