![]() |
![]() |
|
||||||
|
|
DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need! |
![]() |
|
Thread Tools | Search this Thread |
Rating: ![]() |
Display Modes |
![]() |
#61 |
www.my330i.com
|
P0313 is Misfire Detection with Low Fuel
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#62 |
I know, I'm wondering if anyone knows how to make this code go away. The car has plenty of fuel. I'm wondering if the fuel filter is clogged or if the injectors might be clogged.
|
|
![]() |
![]() |
![]() |
#63 |
Registered User
|
P2231 & P2234?
Erm, I'm getting a P2231 O2 Bank 1 Sensor 1 & P2234 O2 Bank 2 Sensor 1
error... Signal CKT Shorted to Heater CKT Car's running fine though Anyone?! |
![]() |
![]() |
Sponsored Links | ||
Advertisement | ||
|
![]() |
#64 |
Registered User
|
My car went into limp mode. I read the error p1633. Throttle Valve Adaptation; Limp Home Position (BMW) anyway to find out why it went into limp mode to begin with. thanks.
Last edited by JapanRed; 04-22-2008 at 08:47 PM. |
![]() |
![]() |
![]() |
#65 |
Registered User
|
P0012 A Camshaft Position - Timing Over-Retarded (Bank 1) is over retarded really a fault
![]()
__________________
***NEW UPDATE***
1985 318i E30 |
![]() |
![]() |
![]() |
#66 |
Registered User
|
very nice..........I'm caming from bimmerforum just to get this code list!
|
![]() |
![]() |
![]() |
#67 |
![]() Is there a way you can locate these codes other than using a diagnostics machine??
any ![]() |
|
![]() |
![]() |
![]() |
#68 |
Registered User
|
interesting...
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#69 |
Registered User
|
HI
i have this code: P0169 what is it????????? regards |
![]() |
![]() |
![]() |
#70 |
I got an unknown code number come up P0316 anyone kno where i can find that description at?
|
|
![]() |
![]() |
![]() |
#71 |
Registered User
|
code 2240 330i zhp
my car dropped me a SES. only one code posted as 2240
-O2 sensor positive current circuit/open Bank 2 sensor 1 so with some looking it appears to be the pre-cat O2 getting stupid at only 52K miles. so the question is: is replacing this sensor the solution? what are the other things that could give the ECU to through this code? intake, coil, injectors? my symptoms are what feels like misfiring...or stumbling upon accelerartion in 3-6th gears- its a slight stuttering that appears to quiet down or disappear with reduced(minimal) throttle input. plugs have been replaced thoughts on solution or problem track down...for this new owner ?> thanks |
![]() |
![]() |
![]() |
#72 |
Registered User
|
anyone solve this problem yet? and how did u guys solve them?
codes: p0050 oxygen sensor heater control circuit (bank 2, sensor 1) p0036 oxygen sensor heater control circuit (bank 1, sensor 2) p0134 oxygen sensor circuit no activity detected (bank 1, sensor 1) |
![]() |
![]() |
![]() |
#73 |
Registered User
|
I got a code # P1250 can't find it in here. can some one help me, thanks
|
![]() |
![]() |
![]() |
#74 |
Registered User
|
i search and i found it with this error code:
169 CODE THROTLE VALVE SWICH OFF 169 (Idle Air Control Closing Coil
__________________
To view links or images in signatures your post count must be 0 or greater. You currently have 0 posts. |
![]() |
![]() |
![]() |
#75 |
Registered User
|
I just got a P1011 read from AutoZone.
Anyone know what that means? I can't find it anywhere in the interwebs... -BL |
![]() |
![]() |
![]() |
#76 |
Registered User
|
same problem
|
![]() |
![]() |
![]() |
#77 |
Registered User
|
This is a great aid. What would be reeeeeeeeeeeeally good would be to have listed against each code the probable causes as a % of probabilty. Bit of an ask I know, but maybe someone has this information?
![]() |
![]() |
![]() |
![]() |
#78 |
Registered User
|
i need some help...i got a bunch of codes...and i seen what it was ...but what do i need to fix??...can i get some help....??...the codes are P1250...0300,0301,0303,0304 and 0441......what does it mean....and how can it be fixed??..IN NEED OF HELP..............
|
![]() |
![]() |
![]() |
#79 |
Registered User
Join Date: Oct 2009
Location: Elkridge, Maryland
Posts: 18
My Ride: "03 325i- 19" ST160
|
a must keep. thanks
|
![]() |
![]() |
![]() |
#80 |
Registered User
|
P0169
hello, i have a 1999 323i and i have the code p0169 thats anybody knows whats that means and how can i fix it? thanks
|
![]() |
![]() |
![]() |
Thread Tools | Search this Thread |
Display Modes | Rate This Thread |
|
|