E46Fanatics - View Single Post - DIY: OEM Autofolding Mirrors w/ Reverse Tilt!
View Single Post
Old 05-07-2007, 07:36 PM   #23
Ivegotissues666
Registered User
 
Join Date: Jul 2004
Location: Boston, MA
Posts: 1,015
My Ride: 88' BMW E30 SETA
Send a message via AIM to Ivegotissues666
Quote:
Originally Posted by Sharky06 View Post
The ribbon connectors pp are still in the dark. I'll try to work on my ribbons tomorrow.
A ribbon cable is essential wires in a sense, you would just need to figure out what pinouts from the ribbon connectors do what. You could cut the ribbon cable in halve and splice the wires to a connector.

Quote:
Originally Posted by blue dragon View Post
Thats a lot of work just to get mirrors to autofold Hopefully I don't have to do that because I already have memory mirrors with reverse tilt, so what else do I need?
You may already have the mirror memory modules, but you will still have to access the fuse panel for F57 in order to do it the OEM way at least or you could go the simple way and find any old 12v source.

Jared
Ivegotissues666 is offline   Reply With Quote