Mystery connector behind mirror connector?
While I was installing my new sedan mirrors, I noticed an unused 2-pin connector directly beneath the 6-pin mirror connector.
I have a 1999 323i so I don't believe I have the (connected to fuse 57) euro-fold capabilities. However, I tried to plug in the 2-pin wires from my mirrors and they fit perfectly.
There are a total of four connectors in the door. 2 for the speakers (where the blue connector is in the photo), 1 for the side mirror, and the unknown 2-pin connector. The same setup exists on both the passenger and driver's side.
Anyone know what this could possibly be? Tried a search and came up with nothing.
I was just doing some research for my power fold retrofit and found your lonely post lol
Seems like your car is pre-wired for the auto fold mirrors. Unlike mine :(
|All times are GMT -5. The time now is 06:35 PM.|
Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
(c) 1999 - VerticalScope Inc. All rights reserved.