E46Fanatics (https://forum.e46fanatics.com/index.php)
-   Driveline, Engine & DME Tuning (https://forum.e46fanatics.com/forumdisplay.php?f=98)
-   -   ISAless Help (https://forum.e46fanatics.com/showthread.php?t=1107996)

cwarel 07-02-2016 01:13 PM

ISAless Help
So I followed the instructions on ms43wiki on how to remove isa.
1) So i took ISA unit out completely and there was a hole size about 3/4 inch))
2) Went to home depot and bought a thing that you should put on the leg of ur chair so it doesnt scratch the floor , it has a cone shape and its thick rubber so it fits in the whole perfectly blocking all the air.
3) ECU parameters changes , moment where i spend 3 hours doing it , cuz 3 times tunerpro closed on me without saving the progress so i had to do it over)) :censor::banghead:
So here is my big question there is 2 lines that i cannot find which are
dummy_w_1: 800
c_dyw_cycnr_is: 150
I check abbreaviations and still couldnt find them anywheres
So the car runs without them , but it stalling out sometimes ,and linear throttle works the best with ISA delete , well i think so)
I can upload my file if you want to check it just lemme know

daniel_f. 07-02-2016 01:17 PM

Dummy_w is not necessary to Change, i Need to Look up tue other one

cwarel 07-02-2016 10:55 PM

So also I have a question how can i raise rpm and make it more stable? ( i live in new york and its hot)

daniel_f. 07-03-2016 12:56 AM

Unfortunally it wonŽt recognize higher idlespeed Targets (right now!), so the easiest work around is to raise idlespeed Targets and open the throttle just a bit more.

It should automatically adjust the throttle to whatever is needed, however it currently doesnŽt do it, so its still experimental.

cwarel 07-03-2016 12:09 PM

alright sounds simple enough , how do i do it ?)

daniel_f. 07-03-2016 12:49 PM

Modify the corresponding maps?

cwarel 07-03-2016 01:09 PM

alright ill look into that later on today

daniel_f. 07-04-2016 06:02 AM

Stay tuned for an amazing update ;)

Seems like a fellow MS43 artisan found the trick :bow:

sda2 07-04-2016 08:35 AM

Very curious for that as well! Any idea of how long it takes?

Is there some kind of public information on what the dev team does at the moment?

daniel_f. 07-04-2016 08:40 AM


Originally Posted by sda2 (Post 17013273)
Very curious for that as well! Any idea of how long it takes?

Is there some kind of public information on what the dev team does at the moment?

WeŽre being lazy right now :D Its been on test for two days so far and right now throttle, ignition and fueling is used to set idlespeed. I havenŽt heard back if the idlespeed setpoints are working like expected, so its probably another few days until its getting published.

Next topic is most probably clean alpha/n, but i wanna rewrite some of the code before that gets published.

Next next topic is most probably variable Launch with bang and NoLiftShift, weŽll see.

Blu302 07-04-2016 08:46 AM

Talk to diablorojo. About the Isa removal, he has just gone through it. I helped him with high rpm at idle and reducing the hunt.

The idle aim numbers etc still work as normal and the hunt is removed by changing the vanos, ignition and icv starting position.

daniel_f. 07-04-2016 08:56 AM

Send me a PM on this please.

sda2 07-04-2016 09:29 AM

Thanks Daniel!

What about PUC? I heard it doesnt really shut down the injectors.

daniel_f. 07-04-2016 09:34 AM

Sorted ;)

sda2 07-04-2016 09:53 AM

That's very very nice to hear! Can't wait to get my car back and throw this thing out!

daniel_f. 07-04-2016 12:34 PM

Idlespeed setpoint works :bow:

So its official: ISAless is now finally possible and works perfectly. No hunting, no hassle.

Thanks to Tobias S. for figuring it out :hi:

sda2 07-04-2016 01:19 PM

Thanks for the solution Tobias!

Is it really "only" changing these four parameters?

c_abc_inc_isa_1: 0
c_abc_inc_isa_2: 0

daniel_f. 07-04-2016 01:22 PM


Originally Posted by sda2 (Post 17013441)
Thanks for the solution Tobias!

Is it really "only" changing these two parameters?

c_abc_inc_isa_1: 0
c_abc_inc_isa_2: 0


Had another chat with Tobias and i really start to wonder about myself... I canŽt count the hours i spent disassembling and comparing dozen of subs in IDA and at the end of the day, its just supressing the DTCs... Really makes me wonder if automotive engineers tend to overcomplicate things... :)

IŽll quit work earlier tomorrow to give it a test!

sda2 07-04-2016 01:26 PM

Better throttle reaction? Can we now make the throttle linear?

daniel_f. 07-04-2016 01:31 PM

I haveŽt tested it, so canŽt comment on the throttle reaction. Second part should be doable now :)

All times are GMT -5. The time now is 03:53 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2020, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2020 DragonByte Technologies Ltd.
(c) 1999 - VerticalScope Inc. All rights reserved.