Hi Nicker,
Fantastic DIY with pics-- i printed it all and did it myself--took about 9 hours. Just a couple suggestions-- I found taking off the DISA before removing the lower air boot made access to the hose clamps much easier, and put boot back on before DISA. Also, was pretty hard attaching hose from oil stick tube to bottom of replaced PCV was difficult after putting everything back together--had to take off a wire harness behind alternator and attach it to new PCV. Would it work better to attach this hose to the new pcv when it is first installed?
Basically fantastic guide for this project. THANKS!!, Bob