|
|
|
|
||||||
|
DIY: Do It Yourself
Post here to share or improve your wrench turning skills! All BMW E46 DIY tips, tales, and projects discussed inside. Learn to work on your car and know the right BMW parts you will need! |
 |
|
|
Thread Tools | Search this Thread | Rate Thread | Display Modes |
10-03-2008, 02:36 AM
|
#1 |
|
Registered User
|
Crankcase Vent Valve (CCV) DIY
Here is a link to a guy who replaced his CCV valve on an M52 without removing the intake manifold!!
http://www.bimmerfest.com/forums/sho...d.php?t=258503 FYI: My malfuctioning CCV sound like someone is squeezing a goose under the hood every time I tap the throttle been searching for a DIY like this for quite a while hope it helps others too! |
|
|
|
10-17-2008, 04:38 PM
|
#2 |
|
Registered User
|
Sweet!
|
|
|
|
|
01-29-2009, 03:57 PM
|
#3 |
|
Registered User
|
on the E46 it's not that simple. I've attempted to do this CCV replacement before. You have to remove alot of parts to get to it on E46 including the throttle body. From what I gather on this forum, you're better off paying a mechanic to do it.
__________________
 "I'm gonna die! Jesus, Allah, Buddha - I love you all! -Homer Simpson |
|
|
|
|
01-29-2009, 04:29 PM
|
#4 | |
|
Keep it clean
|
I did mine in November. It's not that bad. Just have to have patience.
Actually, I have to do it again this weekend. I neglected to replace one of the hoses. It all has to come out to do it. Le sigh... Quote:
__________________
|
|
|
|
|
|
02-02-2009, 11:59 AM
|
#5 |
|
Registered User
|
any DIY's for this on OUR CARS
__________________
|
|
|
|
|
02-20-2009, 11:22 PM
|
#6 | |
|
Registered User
|
Quote:
|
|
|
|
|
|
06-23-2009, 11:25 AM
|
#7 |
|
Registered User
|
I have not been following, sorry what are the symptoms of a bad CCV, Id have to replace my Oil filter housing gasket, should i do this while im at it. tnx.
__________________
 |
|
|
|
|
| Thread Tools | Search this Thread |
| Display Modes | Rate This Thread |
|
|
Linear Mode
