E46 Fanatics Forum banner

Need help adjusting JL Slash 500/1 v2 Amp

11K views 6 replies 4 participants last post by  KamPow3r 
#1 ·
ok so this is my setup... i have a new Dynavin V5, a BSW stage 1, a JL 12W6v2, a JL Slash 500/1v2 and i don't know how to tune my Amp. (i know, i know.. lol:banghead:) i wanted some of your opinions on how i should set up the settings on the amp...

just tell me what should be where...
incase your wondering i want it loud and thumping... but not distorted




Thank You ahead of time :thumbup:
 
See less See more
1
#4 ·
I have the jl e1400d and I forget how I did it, but I downloaded the manual online and it tells you exactly how to adjust it. you have to get a 0db sound file on a cd and play it at 3/4 volume and get a voltmeter and turn the input sensitivity I believe up or down until you hit a certain amounts of volts. I don't know foresure but you have to refer to owners manual.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top